www.dodo-upgrades.nl

hello need some programming assuming you're using if it is not much to ask of course.
My motor is a d14a3 head d16z6 with 190cc injectors and ecu p28

Please helpppp

Thanksssss

Start with P28 bin, only multiply by 240/190 =~ 1.26 on the fuelmaps. You should be fine. Got no bins myself unfortunately.

I am so scared of this procedure for mini-me...
Tell me Joris, did you managed to programm it yourself or someone did it for you?
It is the only thing that stops me to advance for mini me...
Regrats

Thanks looks like a simple solution had not occurred to me

The problem is that function p28 chipped but two weeks ago I was broke and I decided to try chipping P1G myself that I had one at home.

It is all installed but I did not detect the computer with the nokia cable.

Has anyone ever had an ecu chipping of these?

Thanks for the help.

I moved it to right place? What exactly do you need? A software to chip the ecu or the ecu layout?

Yes thanks.
My problem is with nokia cable with datalog, I've tried a chip and etched with a map stock d16z6 and works well on chipping.

I need if someone is kind enough to provide a map for mini-me or better yet if anyone knows how to solve the problem with ECU.

Nobody has any one P1G chipping?

Thanks

i wish i could help on that. There are a few guys here that can do that!

I've had help, so I know only a little about the subject .

saxophonias wrote:i wish i could help on that. There are a few guys here that can do that!