www.dodo-upgrades.nl

iam wanting to put a d16 into a ej9 but having problem with engine harness,i ahve been told that i can use a d14 loom and wire vtec in but not sure how does any no one no if this is wright and if so any diagrams?

kyle

You can not swap d16z6 harness to ej9 because they are totally different.
You can swap from 96-00 civics d16 or d15 and from ej9 99-00 but not from 92-95 civics

can i use the d14 harness and add vtec to that?

kyle_ek wrote:can i use the d14 harness and add vtec to that?

BETEK wrote:You can not swap d16z6 harness to ej9 because they are totally different.
You can swap from 96-00 civics d16 or d15 and from ej9 99-00 but not from 92-95 civics

Because there are many variants of harnesses that can you swap/make/modify it is not simple to answer in one line.
I suggest to read the forum, the answers that you want are all here!!

is it possible to use a ek4 vti harness of a b16 in a ej9 chassis so that a d16z6 can be fitted, if so can you just use the engine harness or do you need engine and interior harness.

thanks kyle

I think the EK4 harness might work, not 100% sure though.

Refitting the original EJ9 loom is definetly an option. It's exactly what I did for my OBD1 and VTEC swaps. Just read my website and especially these articles:

http://www.dodo-upgrades.nl/obd1swapd14a34.htm
http://www.dodo-upgrades.nl/cityme.htm