Today my ej9 started raising the engine temp, but the heater@max heat stayed cold/luke warm. After a while the temp dropped after i fiddled with the heatercontroles, and the heater became warm. What's wrong with it? Engine or heatercontroles??
Haven't had time to check the coolant.
Any of you got an idea?
From now on you are 'D' squad. 'D' for dirtbags...
"If Honda does not race, there is no Honda" Soichiro Honda
Assuming the blower motor was running well the following items are advised to check:
-Clogged heater duct
-Clogged blower outlet
-Clogged heater valve
-Faulty airmix door
-Heater valve cable adjustment (should not be the case since it worked properly later on)
-Air mix control cable adjustment (uh isn't that the same as above?)
-Faulty cooling system thermostat (should mean cold engine which was not the case?)
-Clogged evaporator (with air conditioning)
-Frozen evaporator (with air conditioning)
I'll get you some pics this weekend probably (though you can most likely pick it up saterday/sunday if you like), it is only the right 'fender' part which is bend out a small bit... yes it is better and perhaps with a heater you can get it back into shape.