Cams for D14

[saxophonias]

Nick i am almost sure that when i told him that i can't send my d14 cam there, he told me that the d16y7 cam will do the job (i would buy the core from them)so i assume it's the same as a base to do the regrind. Am i wrong?

[hondaNickx]

They just listed that in there cause they done a few D14 regrinds.
Don't you get it ?It's just an example ,they might as wel list D13 and D16v1 too cause they could regrind them also.But it doesn't mean they have a special program or cam for D14's.
Every cam is handled unique ,so they can regrind every cam from any engine they just apply what they know will work.
Maybe they use a high tech program or maybe they grind them based on knowledge i don't know .

@ Saxo if Bisi said you could use the Y7 cam for a D14 regrind then you could buy the cam core without any problems.

I just like to keep everything toghether from the same head.
I only have 1 head which is getting ported and where my level 2 cam regrind came from and my cam caps.
This way i'm 100% sure everything will work toghether without any troubles.But that's just me no one needs to copy me ,do your own things and make yourself proud.

[lakaiD14]

okay i get it

but the best option is to send your own cam for a regrind or didn't i get this right?

[hondaNickx]

In my opinion yes ,but i'm not saying using a Y7 core will be a bad thing either.I'm hooked on details you all should know that by now haha

[saxophonias]

Nick are there any other concerns apart from pattern and shape that i should worry about? I used to think that d14 and d167y cams are interchangeable as for their shape making them complete bolt on

[pioootr]

D14A3/A4/Z1/Z2, D16Y7, D16W3 camshafts are interchangeable (100% sure!)

Here are specs of them that I know:

D14Z2:
lobe height (Intake / Exhaust) = 34,848 / 36,019 mm

D16Y7:
lobe height (I/E) = 35,299 / 37,281 mm

D16W3:
(two different intake lobes)
lobe height (Intake1 / Intake2 / E) = 35,018 / 34,734 / 37,904 mm

[lakaiD14]

yesterday i have received my bisimoto level 2 camshaft and valvesprings i will post pictures
in a few days

at bisimotos they have regrinded my original camshaft

[mynameisowen]

Awesome!

[Dodo Bizar]

Thnx Pioootr, please introduce yourself as well in the newbies section and welcome .

[pioootr]

I have measured the d14z2 camshaft timing and made a diagram myself:




d14z2 cam + PM3B camgear (stock d14)


soon I'll post next diagrams.