www.dodo-upgrades.nl

Hey guys,

My friend is scrapping his civic coupe engine code d15b7 tomorrow and i was wondering is there anything i could use from the engine for myself? I am going to do a y8 IM swap and then a obd1 conversion and Y8 mini-me. I am not familiar with the B7 engine myself, could i use parts from this for my project;

D15B7
* Found in:
o 1992-1995 Honda Civic CX (Canadian model)
o 1992-1995 Honda Civic DX/LX
o 1993-1995 Honda Civic del Sol S
o 1992-1995 Honda Civic LSi Coupe (European Market)
+ Displacement : 1,493 cc (91.1 cu in)
+ Bore and Stroke : 75 mm × 84.5 mm (3.0 in × 3.3 in)
+ Compression : 9.2:1
+ Power : 102 hp (76.1 kW, 103 ps) @ 6200 rpm
+ Torque : 98 ft·lbf (13.5 kg/m, 133 Nm) @ 3800 rpm
+ Valvetrain : SOHC (4 valves per cylinder)
+ Cam Gear: 38 Tooth
+ Piston Code : PM3
+ Fuel Control : OBD-1 MPFI
+ ECU Code: P06

Thanks a lot guys

use the engine starter.

why use this starter???

sorry not to refer. the engine start sound will be better i think if that is the same starter of the other 1.5 models. i've heard a 1.5 115hp start and it has lot better sound that ours. this is discussed here: viewtopic.php?f=3&t=98

BTW i dont know if oil pump is diff but if it is you could upgrade.
Cheers

ecu and pistons

some day can be useful!

have they the same bore?

What price are you getting them? If it is cheap buy the whole engine.

Plenty of stuff you can use. obd1 dizzy i think, obd1 TB, air induction tube, still can't use cam or valvetrain, some sensors O2 sensor, alternator. These come to my mind. Let's see what the others will say too.

Im not gonna take the pistons because thats a bit long but i will take the ecu, cheers.

Law_ wrote:have they the same bore?

yes, 75mm bore and all D motors that i know have the same.

ECU, Injectors, fuel rail, hoses, TB, all sensrors from IM, IACV, STARTER! distributor