The piston rings kit are the same ?
I think so yes but i prefer asking the question
Rings thickness D serie :
1st 1.20 mm
2nd 1.50 mm
Oil 2.80 mm
D14 Bearings
Re: D14 Bearings
Super !
The piston rings kit are the same ?
I think so yes but i prefer asking the question
Rings thickness D serie :
1st 1.20 mm
2nd 1.50 mm
Oil 2.80 mm
The piston rings kit are the same ?
I think so yes but i prefer asking the question
Rings thickness D serie :
1st 1.20 mm
2nd 1.50 mm
Oil 2.80 mm
D14A4 EJ9 Stock
Re: D14 Bearings
I found the 13010PHXG00 Piston from Mahle Europe
Two names and parts numbers :
Name (PERFECT CIRCLE) : 56 16018 0
and
Name (MAHLE Original) : 631 60 00
OEM parts numbers :
Engines :
Piston :
Rings :
Now it's time to find them on the web
Two names and parts numbers :
Name (PERFECT CIRCLE) : 56 16018 0
and
Name (MAHLE Original) : 631 60 00
OEM parts numbers :
Engines :
Piston :
Rings :
Now it's time to find them on the web
D14A4 EJ9 Stock
-
hondaNickx
- Posts: 713
- Joined: Wed Aug 05, 2009 1:06 am
- Location: Belgium
Re: D14 Bearings
Great! I only hope those are cheaper then oem honda pistons.Mahle is also a good brand ,i believe porsche has mahle pistons too.Mahle pistons should be available from local dealers .Strange is i checked with other part numbers of the P3Y (D14a4) pistons and those arent listed also pistons from D14a8 engine and those arent listed either.Only the PHXG pistons .I also may have found mazda connecting rods that might fit the D14 engine ,but i need to look into that further.
I only hope those are cheaper then oem honda pistons.Mahle is also a good brand ,i believe porsche has mahle pistons too.Mahle pistons should be available from local dealers .Strange is i checked with other part numbers of the P3Y (D14a4) pistons and those arent listed also pistons from D14a8 engine and those arent listed either.Only the PHXG pistons .I also may have found mazda connecting rods that might fit the D14 engine ,but i need to look into that further.
Last edited by hondaNickx on Tue Dec 23, 2014 12:59 pm, edited 1 time in total.
Quote from Endyn:"The combustion chamber is a better shape than the DOHC.So don't chunk those 1.6 SOHC engines, they can make really good power. For a pure performance application, regardless of application, I'd choose the SOHC. No bull!"
Re: D14 Bearings
Great research job for Mazda connecting Rods hondaNickx ! Thank you !
About Mahle, TRD (Toyota racing) has Mahle pistons too.
About Mahle, TRD (Toyota racing) has Mahle pistons too.
D14A4 EJ9 Stock
-
hondaNickx
- Posts: 713
- Joined: Wed Aug 05, 2009 1:06 am
- Location: Belgium
Re: D14 Bearings
Yes unfortnatly they also don't fit , big end width is just too small 
Honda really did make a connecting that no other brand uses .Impossible to find any that fits ,i did find some with the same 40mm big end diameter but most of the time the big end width is too small.
Honda really did make a connecting that no other brand uses .Impossible to find any that fits ,i did find some with the same 40mm big end diameter but most of the time the big end width is too small.
Quote from Endyn:"The combustion chamber is a better shape than the DOHC.So don't chunk those 1.6 SOHC engines, they can make really good power. For a pure performance application, regardless of application, I'd choose the SOHC. No bull!"
Re: D14 Bearings
Nice finds guys keep them coming !
keep them coming !-
hondaNickx
- Posts: 713
- Joined: Wed Aug 05, 2009 1:06 am
- Location: Belgium
Re: D14 Bearings
D14 connecting rod bearings part numbers :
KOLBENSCHMIDT CB-2204GP STD
HONDA 13022-PE0-S10
HONDA 13022-PE0-S20
HONDA 13211-PE0-003
FEDERAL Mogul 4-1510 CP STD
ACL 4B1930 STD
Overal view D14 aftermarket bearings
ACL Duraglide Conrod Bearing Set : STD,0.25,0.50 : 4B1930
ACL ALuglide Main Bearing Set : STD, .25, .50, .75, 1.00 : 5M1932
ACL Thrustwasher Set : STD, .125, .25 ACL : 1T1952
MAHLE /CLevite 77 main bearing set : MS-1806AL STD, 0.25 0.50 ,0.75 , 1.00
MAHLE /Clevite 77 conrod bearing set : CB1479P
MAHLE Trustwasher set : TW-327S
KOLBENSCHMIDT CB-2204GP STD
HONDA 13022-PE0-S10
HONDA 13022-PE0-S20
HONDA 13211-PE0-003
FEDERAL Mogul 4-1510 CP STD
ACL 4B1930 STD
Overal view D14 aftermarket bearings
ACL Duraglide Conrod Bearing Set : STD,0.25,0.50 : 4B1930
ACL ALuglide Main Bearing Set : STD, .25, .50, .75, 1.00 : 5M1932
ACL Thrustwasher Set : STD, .125, .25 ACL : 1T1952
MAHLE /CLevite 77 main bearing set : MS-1806AL STD, 0.25 0.50 ,0.75 , 1.00
MAHLE /Clevite 77 conrod bearing set : CB1479P
MAHLE Trustwasher set : TW-327S
Quote from Endyn:"The combustion chamber is a better shape than the DOHC.So don't chunk those 1.6 SOHC engines, they can make really good power. For a pure performance application, regardless of application, I'd choose the SOHC. No bull!"