This short ram approves in the oem intake manifold of ej9?
This short ram approves in the oem intake manifold of ej9?
Anybody know if this short ram approves in the oem intake manifold of ej9??
I do not want to change the intake manifold because I do not have much effect on motor
I do not want to change the intake manifold because I do not have much effect on motor
- mynameisowen
- Posts: 1307
- Joined: Thu Aug 20, 2009 3:38 am
- Location: London or Oxford, England
- Contact:
Re: This short ram approves in the oem intake manifold of ej9?
What do you mean "you dont have any effect on the motor". Are you not allowed to make any modifications? because swapping the intake manifold is very important if you want to make any respectable power, that intake will just produce a lot more noise instead of much power gain...
1996 EJ9 Civic
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi
Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi
Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete
Re: This short ram approves in the oem intake manifold of ej9?
I don't want to swap the collector because the car will be for my girlfriend!
The short ram worth the investment, or better to keep quiet?
The short ram worth the investment, or better to keep quiet?
- saxophonias
- Posts: 2592
- Joined: Fri Jul 03, 2009 6:03 am
Re: This short ram approves in the oem intake manifold of ej9?
You gain some power. You can always keep your stock airbox with a panel filter and remove the resonator box. This will give you good low and mid rev torque.
- mynameisowen
- Posts: 1307
- Joined: Thu Aug 20, 2009 3:38 am
- Location: London or Oxford, England
- Contact:
Re: This short ram approves in the oem intake manifold of ej9?
do you think removing the resonator box improves performace? i have done this but left the stock black inlet tube on, i havent noticed and gains just a deeper soundin engine.
I believe dodo had this intake. did you feel much gain using that inlet but standard inlet manifold joris???
I believe dodo had this intake. did you feel much gain using that inlet but standard inlet manifold joris???
1996 EJ9 Civic
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi
Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi
Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete
- saxophonias
- Posts: 2592
- Joined: Fri Jul 03, 2009 6:03 am
Re: This short ram approves in the oem intake manifold of ej9?
I had been driving my car with this set up for a short time. That is a panel filter (apex) in the stock box, with the resonator off and a bigger intake tube (55mm). The sound was indeed deeper but the low end torque was very improved comparing to stock. I remember it used to pull from 1200rpms in each gear.
- mynameisowen
- Posts: 1307
- Joined: Thu Aug 20, 2009 3:38 am
- Location: London or Oxford, England
- Contact:
Re: This short ram approves in the oem intake manifold of ej9?
i see because im runningcopletely stock so manybe the difference is just from the aftermarket filter and larger tubing??
1996 EJ9 Civic
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi
Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi
Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete
- saxophonias
- Posts: 2592
- Joined: Fri Jul 03, 2009 6:03 am
Re: This short ram approves in the oem intake manifold of ej9?
Yeap and add the lack of resonator which is very restricting
Have a look here
This is the resonator
Have a look here
This is the resonator
Re: This short ram approves in the oem intake manifold of ej9?
i've removed mine, before the IM swap. the sound was definitly better on WOT but i guess it was the only difference. the name ressonator... i'm thinking if this isnt the same thing as the ressonating effect on the IM plenum... The waves theory we discussed here...
If that is true, removal of ressonator would decrease performance. I read in couple of forums that a minor decrease in hp was noticed on a dyno after removal and the opposite in other foruns... Anyway, now i dont have it. Cheers
If that is true, removal of ressonator would decrease performance. I read in couple of forums that a minor decrease in hp was noticed on a dyno after removal and the opposite in other foruns... Anyway, now i dont have it. Cheers
- saxophonias
- Posts: 2592
- Joined: Fri Jul 03, 2009 6:03 am
Re: This short ram approves in the oem intake manifold of ej9?
Theoretically maybe, but it always has to do with the design of each intake system. The purpose of ours is only for reducing the noise of the intake system i guess.