my b16a

[Power of Vtec]

185.7bhp and 16.2kg of torgue, on a MAHA dynometer

[saxophonias]

good!!Specs?

[mynameisowen]

Cool! I would like to see specs aswell

[Power of Vtec]

the engine is a 1st generation b16a (157bhp) obd0
custom aluminum cai, itr throtle body, itr 4-2-1 header, 63.5mm decat custom exhaust,
ek9 n1 crank pulley, tuned ecu (road & dyno), exhaust valve springs are oem double springs from intake, small hamp oil filter, torco oil, a/f is 12.9-13:1
the motor has never been opened,has over 300K klm and burns oil

[Dodo Bizar]

Very nice, typical B16 curve I see. Max torque around 8000 and max power at 8500. I think it will be a dream to drive.

If you ever want to get even more power I can only give 2 recommendations, B16B cams and a 4-1 or tri-y header. Will especially provide more torque in the non-VTEC part is my guess. But still, I can imagine you don;t need to have it faster than this .

[Power of Vtec]

thanks for your nice words,guys
the torgue curve would be better, with a rebuild and a skunk/itr intake malifold
future plans are jdm b18c or forged b20z with a tri-y, 70mm exhaust and skunk pro cams

[mynameisowen]

The torque curve just keeps climbing and climbing! Super Honda! I'm happy for your results.