how to map a mini-me?
-
saxophonias
- Posts: 2592
- Joined: Fri Jul 03, 2009 6:03 am
Re: how to map a mini-me?
do we have a link for the KMS system?
-
Dodo Bizar
- Site Admin
- Posts: 2009
- Joined: Mon Jun 22, 2009 10:36 pm
Re: how to map a mini-me?
You mean this?
Website:
http://kms.vankronenburg.nl/
Specifically this product:
http://kms.vankronenburg.nl/products_ecu.html
Website:
http://kms.vankronenburg.nl/
Specifically this product:
http://kms.vankronenburg.nl/products_ecu.html
-
mynameisowen
- Posts: 1307
- Joined: Thu Aug 20, 2009 3:38 am
- Location: London or Oxford, England
- Contact:
Re: how to map a mini-me?
Great topic Joris and 007! You definitely should write a book (or at least a nice how-to guide on this site), you've spread more than enough information now to make sure you are going to car-heaven 
1996 EJ9 Civic
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi
Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi
Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete
Re: how to map a mini-me?
car heaven... mmm... I wonder what it will look like.mynameisowen wrote:Great topic Joris and 007! You definitely should write a book (or at least a nice how-to guide on this site), you've spread more than enough information now to make sure you are going to car-heaven
it's been a long time and I've been getting increasingly comfortable with mapping. will definitely write a how-to about it sometime soon.
-
mynameisowen
- Posts: 1307
- Joined: Thu Aug 20, 2009 3:38 am
- Location: London or Oxford, England
- Contact:
Re: how to map a mini-me?
Please do!
1996 EJ9 Civic
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi
Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi
Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete
Re: how to map a mini-me?
Great write up Joris !
Thanks for that !
Thanks for that !
-
Dodo Bizar
- Site Admin
- Posts: 2009
- Joined: Mon Jun 22, 2009 10:36 pm
Re: how to map a mini-me?
Your welcome guys.
Re: how to map a mini-me?
So, here we can discuss in further detail the differences between D16Z6 basemap and D14Y8 from Dodo.
That is the best example we have from a powerful D14 NA !
Dodo:
Is this map for the new cam or for the D16Z6 one?
Ignition Delta (D14Y8 - D16Z6)
Fuel Delta (D14Y8 - D16Z6)
The maps breakpoints are slightly different between the 2 maps but I guess that is just Crome / eCtune conversion
Anyway, on the ignition side we have 10°CRK difference, and quite more on Low Valve Lift, full load.
That is being discussed on other topic: http://bit.ly/1sMxbmS
On the fuel side:
Quite neutral on the low valve lift side, the 3/4% reduction area should be there for fuel economy
Generally 10% reduction on the High valve lift up zo 6500, slightly richer afterwards, and most of the enrichment on the full load area.
Dodo / CRX_2 can you give some hints on this calibration?
Best Regards
That is the best example we have from a powerful D14 NA !
Dodo:
Is this map for the new cam or for the D16Z6 one?Ignition Delta (D14Y8 - D16Z6)
Fuel Delta (D14Y8 - D16Z6)
The maps breakpoints are slightly different between the 2 maps but I guess that is just Crome / eCtune conversion
Anyway, on the ignition side we have 10°CRK difference, and quite more on Low Valve Lift, full load.
That is being discussed on other topic: http://bit.ly/1sMxbmS
On the fuel side:
Quite neutral on the low valve lift side, the 3/4% reduction area should be there for fuel economy Generally 10% reduction on the High valve lift up zo 6500, slightly richer afterwards, and most of the enrichment on the full load area.Dodo / CRX_2 can you give some hints on this calibration?
Best Regards