PO6 --> P28

[Law_]

Off Topic : Why are members not introducing thereselvs and start asking things? This is not an encyclopedia ! It is a forum

[AlexDJ]

I find some informacion and test it ... its work

http://www.angelfire.com/extreme3/dream ... nda_92.htm

[CRX2]

P06, P28 and P30 ECU are all from the same family. The P28 and P30 are the same hardware, only the software differs. The "chip/ROM/Bin" desides if it is a P28 or a P30.

P06 doesn't have the VTEC routine but is easily modded. The biggest problem is to find the obsolete component for the VTEC switch. The Sanken SK5151 or a IR6220 is not an easy to buy component...

[ilya]

looked through this topic, I realized that so much more work)) is not so simple. I looked at shops and those two elements (SK5151 - generally no, IR6220 - can still be found but in a different case, but it's not a big problem).

I began to wonder ECU, a couple of days ago I received a head D16Z6, its distributor, camshaft, wires .... in the spring I want it all to install. now all I read ... not many are beginning to understand what work is ahead.

until I began to understand that there is a separate ECU for the AT and separately for MT. as a ECU with VTEC and without him. originally I thought that I would follow the leadership of DODO, namely find OBD1 p06. with harness adapter for OBD2a (96-98).
BUT! p06 is no VTEC. and there are solutions: either to add to p06 or use immediately p28. So?

Q: After the "Add" elements on the ECU p06. I had to reprogram it, add CROME? add a chip to reprogram? or i could stay p06+Elements VTEC?

i know) many words)) but really confused(

[ilya]

i dont find info about SK5151, but i find some:

MSK5151-1.5ETD - VERY HIGH CURRENT, LOW DROPOUT VOLTAGE REGULATORS - M.S. Kennedy Corporation

maybe analog?

http://www.alldatasheet.com/view.jsp?Searchword=SK5151-
what u think about?