Inlet manifold gaskets

Any issues? Discuss them here
User avatar
cad civic mechanic
Posts: 140
Joined: Mon Jan 18, 2010 8:08 pm
Location: Bangor N.I

Re: Inlet manifold gaskets

Post by cad civic mechanic »

Owen, I will post pics of my 1999 D14Z4 (off 1.4 i S 90 BHP civic) with part numbers etc tomorrow, need to dig it out of my box of goodies :lol:
Dont slack her till you wreck her, horse on regardless

User avatar
mynameisowen
Posts: 1307
Joined: Thu Aug 20, 2009 3:38 am
Location: London or Oxford, England
Contact:

Re: Inlet manifold gaskets

Post by mynameisowen »

Awesome that would be really helpfull.
ilya wrote:D14A4 Civic Hatch Gen6 1998
TB 16400-P3Y-G01 - Euro 850.44 OEM HONDA

D16Y8 Civic Coupe 1998 5MT 1.6ISR VTEC
IM GASKET 17105-P2F-A02 - Euro 16.18 OEM HONDA
Thanks a lot.
But surely not 850Euros for TB gasket?? :D
1996 EJ9 Civic
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi

Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete

User avatar
ilya
Posts: 565
Joined: Wed Aug 05, 2009 1:27 pm
Location: Russia
Contact:

Re: Inlet manifold gaskets

Post by ilya »

TB GASKET
1676-P2A-004 2.46 Euro

u say TB, not TB gasket)) i find TB for u)))

i check shops:
NEW TB OEM HONDA

47 303,37 Rubles
61 974,18 Rubles

1 Euro = 41 Rubles => 47300 / 41 = 1153 Euro.
viewtopic.php?f=7&t=359 how2swap IM
EJ9 Russian Helper http://www.ej9.ru
Full Scheme SFI-OBD1 PDF [ENG]
SofRom 1.15 R2 - Chippest RTP Emulator like Hondata S300 and Moates Ostrich

User avatar
mynameisowen
Posts: 1307
Joined: Thu Aug 20, 2009 3:38 am
Location: London or Oxford, England
Contact:

Re: Inlet manifold gaskets

Post by mynameisowen »

;p thanks man :D
That gasket is for D14A4 TB yea??
1996 EJ9 Civic
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi

Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete

User avatar
ilya
Posts: 565
Joined: Wed Aug 05, 2009 1:27 pm
Location: Russia
Contact:

Re: Inlet manifold gaskets

Post by ilya »

yep, civic gen6 96-98 TB gasket. d14a4 90 hp :)
viewtopic.php?f=7&t=359 how2swap IM
EJ9 Russian Helper http://www.ej9.ru
Full Scheme SFI-OBD1 PDF [ENG]
SofRom 1.15 R2 - Chippest RTP Emulator like Hondata S300 and Moates Ostrich

User avatar
mynameisowen
Posts: 1307
Joined: Thu Aug 20, 2009 3:38 am
Location: London or Oxford, England
Contact:

Re: Inlet manifold gaskets

Post by mynameisowen »

Thanks a lot :D
1996 EJ9 Civic
1998 BB8 Prelude Motegi VTi
1998, B16A2 EK4 Civic VTi

Aims:
EJ9 - Now my GF's car.
BB8 - Rebuild after crash damage to front end.
EK4 - Daily driver. Strip and track prep once prelude project complete

User avatar
cad civic mechanic
Posts: 140
Joined: Mon Jan 18, 2010 8:08 pm
Location: Bangor N.I

Re: Inlet manifold gaskets

Post by cad civic mechanic »

Check out these guys for stock spares. Think you mite need the reg of the car you need the parts for to order them (if you need the throttle body off a d14z4 engine you need the cars reg) if this is so I will trust you and private mail you mine so you can order and get part numbers if you want ;)

http://www.247spares.co.uk/browse?gclid ... 4wodWXGlGw
Dont slack her till you wreck her, horse on regardless

Post Reply