hondaNickx wrote:
No, D16y7 uses a 4 wire heated lambda .The heated lambda is better anyway imo ,specially if you are using a lambda on the downpipe .You can find Denso first replaced 4wire lambda's on ebay ,they cost around 40-50euro and they are very good.Been using one for 2 years now.Or bosch or NTK (ngk) or oem honda they are all good.The bosch or NTK are a bit more pricy around 80euro but they have a better quality too.I would not recomend using no name lambda's ,i've had bad experience with them
@ Owen
- P06 ecu or another obd1 ecu.
- D15b7 distributor (TD41u)
- 240cc injectors obd2a (Or 240ccinjectors obd1 with obd1 plugs)
- 4wire lambda
- D16y7 engine harnas
- IACV sensor plug (obd1)
- PCS sensor plug (obd1) (in my case D16y7 ued a different style plug)
- Ecu conversion harnas obd2a to obd1.(In my case i had to repin 1 wire from the iacv cause most obd2a to obd1 harnasses are made for a D16y8)
- Distributor conversion harnas 10 pin obd2 to obd1.Or cut and solder obd1 ignition plugs yourself.
PS: PCS and IACV sensor plugs are both thesame plugs (2wires round plug) .
PCS - Control solenoid, this one is for the small black cylindric valve on the back of the IM
Quote from Endyn:"The combustion chamber is a better shape than the DOHC.So don't chunk those 1.6 SOHC engines, they can make really good power. For a pure performance application, regardless of application, I'd choose the SOHC. No bull!"
- P06 ecu or another obd1 ecu.
- D15b7 distributor (TD41u)
- 240cc injectors obd2a (Or 240ccinjectors obd1 with obd1 plugs)
- 4wire lambda
- D16y7 engine harnas
- IACV sensor plug (obd1)
- PCS sensor plug (obd1) (in my case D16y7 ued a different style plug)
- Ecu conversion harnas obd2a to obd1.(In my case i had to repin 1 wire from the iacv cause most obd2a to obd1 harnasses are made for a D16y8)
- Distributor conversion harnas 10 pin obd2 to obd1.Or cut and solder obd1 ignition plugs yourself.
PS: PCS and IACV sensor plugs are both thesame plugs (2wires round plug) .
For the OBD2a harness I should follow Joris's guide or can I buy one??
And for the distributor harness I can buy the one you showed in your earlier post??
This sis truly great work though Nick. Thanks for the replies
The obd2a to obd1 ecu conversion harnasses are widely available.
Boomslang , rywire and others sell them.The distributor conversion harnas is sold only by Rywire afaik.grtz
Quote from Endyn:"The combustion chamber is a better shape than the DOHC.So don't chunk those 1.6 SOHC engines, they can make really good power. For a pure performance application, regardless of application, I'd choose the SOHC. No bull!"
So if I'm right the ECU plugs on a '96-'00 loom are on the engine wire loom ? As far as I know the ECU plugs on a '92-'00 loom are on the interiour loom, isn't it ?
DaWaN wrote:So if I'm right the ECU plugs on a '96-'00 loom are on the engine wire loom ? As far as I know the ECU plugs on a '92-'00 loom are on the interiour loom, isn't it ?
