Inlet manifold gasket

[boggs]

Hello would it be ok to use a D16z6 inlet manifold gasket on my D14 as I have just completed a D16z6 inlet manifold swap and need a replacement gasket.

Also do these gaskets really lower intake temps and give better performance

http://www.funkypower.co.uk/catalogue.p ... oduct=3420

Thanks

[saxophonias]

if you don't have air injection, which you shouldn't (some 99-00 d16y8 do) there will be no problem. The intake gasket does work, but i am not sure about the brand. Hondata has similar products too.
This is how you recognise the air injection manifold

[boggs]

Thanks alot for that. It shouldent be air injected as its off a D16z6 although I will double check. Would you encourage me to wait and get a gasket off a more well known company?

[Law_]

You can swap intake manifold right away. there are not too much gains, and it is relativly easy to change it in the future. go for it. cheers

[boggs]

You can swap intake manifold right away. there are not too much gains, and it is relativly easy to change it in the future. go for it. cheers

I have already done the swap although the gasket i used was dodgy wanted to make sure a D16z6 one would work with no problems before I orderd one.

[Law_]

It does fit.

[boggs]

Thanks guys