hi, i just want to know what are the torque of crankshaft and connection rods from a D14Z2.
I need that because en Panama my country nobody have that info.
Thanks
torque settings
-
Dodo Bizar
- Site Admin
- Posts: 2009
- Joined: Mon Jun 22, 2009 10:36 pm
Re: torque settings
Welcome at the DU. It would be appreciated if you read the forum rules first and introduce yourself at the proper section.
I must be honest that I don't have these torque specs either, I would assume the same torque specs as D15 or D16 engines. I suppose you can find these anywhere in one of the various workshop manual around on the net. Unfortunatley I don't know of any D14 workshop manuals.
I must be honest that I don't have these torque specs either, I would assume the same torque specs as D15 or D16 engines. I suppose you can find these anywhere in one of the various workshop manual around on the net. Unfortunatley I don't know of any D14 workshop manuals.
Re: torque settings
You can ask local Honda dealer
They must have workshop manuals
They must have workshop manuals
-
hondaNickx
- Posts: 713
- Joined: Wed Aug 05, 2009 1:06 am
- Location: Belgium
Re: torque settings
For the Crankshaft girdle : first step 25nm and second step 44nm .This is for D14a4 /D14a3 and d16y7 engines only.(D15z6 ,D16y8 and d16y5 engine have 39Nm as second step)
For the connecting rod caps is the same torque as all Sohc engine 31Nm.
For the connecting rod caps is the same torque as all Sohc engine 31Nm.
Quote from Endyn:"The combustion chamber is a better shape than the DOHC.So don't chunk those 1.6 SOHC engines, they can make really good power. For a pure performance application, regardless of application, I'd choose the SOHC. No bull!"